Brushless.com's 72V Brushless DC Motor (BLDC) offers significant technical advantages and potential for a wide range of high-efficiency, high-power applications. These motors meet the complex demands of industrial, transportation, and automation applications, and perform particularly well in high-voltage, high-power systems.Brushless.com's 72V BLDC motors utilize Brushless DC technology, which provides higher efficiency and longer service life than traditional brushed and induction motors. The brushless design eliminates the frictional losses of a mechanical commutator, which drastically reduces maintenance costs and mechanical wear. To ensure their efficient operation in complex applications, the motor control system and power supply design are key factors. This article will explore several aspects of Brushless.com's 72V BLDC motor's characteristics, applications, and its power supply topology selection, with the aim of providing users with a comprehensive technical perspective that will help them better understand the benefits of this motor.
First, when designing Brushless.com's 72V BLDC motor drive system, choosing the right power topology is critical. For different application scenarios, it may be necessary to select the best option from a variety of power topologies. In many cases, a 24VDC system is a common choice, but for high-voltage applications at 72V, special consideration needs to be given to converting from the universal input AC voltage (85-265VAC) to the desired 72VDC. The choice of power topology is usually determined by two main factors: cost and performance. For high-efficiency systems, a two-stage topology is the most common choice, which consists of a boost PFC circuit (Power Factor Correction) converting the general-purpose input voltage to a high-voltage DC voltage (typically 400VDC), and then converting the 400VDC to the required 72VDC via a DC/DC converter. this two-stage topology, while providing the best power factor (PF) and total harmonic distortion (THD) performance, is more expensive and less efficient due to the multi-stage conversion. In contrast, a single-stage topology, such as a buck PFC circuit, provides a better balance of cost, efficiency and performance. The single-stage topology design not only simplifies the system, but also improves overall efficiency while maintaining good PF and THD performance, making it ideal for 72V BLDC motor drive systems.
In Brushless.com's 72V BLDC motor drive system, the choice of MOSFET has a critical impact on the overall performance of the motor. the switching loss of the MOSFET is an important factor that affects the efficiency of the motor, especially in high-frequency operation scenarios. the gate charge requirement of the MOSFET directly affects the operating temperature of the gate driver IC, and reducing the gate charge can reduce the gate drive loss. Reducing the gate charge reduces the loss of the gate driver, thus improving the overall system efficiency. For example, by selecting MOSFETs with low gate charge (Low Qg), the switching loss of the motor can be effectively reduced and efficiency can be improved. This improved efficiency not only reduces the operating temperature of the MOSFET, but also extends the life of the driver IC and MOSFET. In Brushless.com's 72V BLDC motor applications, switching frequencies are typically high, so the right MOSFET must be selected to optimize the balance between efficiency and performance. In addition, the MOSFET's body diode reverse recovery current issue needs attention. Due to the dead time in half-bridge circuits, the body diode may conduct backwards in the current path, resulting in reverse recovery current and associated power losses. To address this issue, selecting MOSFETs with low reverse recovery charge (QRR) and fast reverse recovery time (tRR) can reduce these losses and improve the overall performance of the motor.
Brushless.com's 72V BLDC motors also benefit from its advanced PFC design to optimize power factor and reduce total harmonic distortion (THD). PFC circuits are critical for high-efficiency systems, especially in high-voltage, high-power applications. By converting the AC input voltage to a stable high-voltage DC voltage, boost PFC circuits can greatly improve power factor and reduce harmonic distortion, resulting in more efficient and stable motor operation. However, the traditional two-stage PFC design, although excellent in performance, may not be suitable for all application scenarios due to its high cost and low efficiency. In contrast, buck PFC topologies offer a more cost-effective alternative while maintaining good performance. Operating in a single-stage topology, buck PFC circuits can offer efficiencies of up to 90% or more and can also significantly reduce the overall cost of the system due to their simplified circuit design. For Brushless.com's 72V BLDC motors, the use of this PFC topology ensures efficient operation of the motor in a variety of applications and significantly improves the overall system price/performance ratio.
Finally, Brushless.com's 72V BLDC motors have the potential to be used in a wide range of applications. The motor is not only suitable for industrial automation and transportation, but also widely used in power tools, agricultural machinery and new energy fields. Its high efficiency, low noise and long life make it ideal for use in modern drive systems. 72V voltage rating enables it to provide excellent performance in scenarios requiring high power output, such as electric vehicles, drones and high-performance e-bikes. In addition to this, Brushless.com offers a wide range of motor controllers and drive solutions tailored to the needs of different applications, further enhancing motor availability and flexibility. When designing and selecting a drive system, users can optimize the overall performance of the motor based on specific application requirements, combined with power topology and MOSFET selection to achieve the highest efficiency and lowest energy consumption.
